-
Seconds later … I slapped the Big Red Button
-
I was supposed to figure out which telecom utilities had wired the pole
-
A slight bit of tinkering made the stack exactly the right height for 45 mm screws
-
The 24 V supply … provides too much voltage
-
Knowing the 3018-Pro has two-start leadscrews with a 2 mm pitch = 4 mm lead
-
The rubber shreds may be necessary
-
The Raspberry Pi running the MPCNC recently seized up
-
More than half an ohm … for a foot of copper wire
The Smell of Molten Projects in the Morning 