-
Entombing that mess with a squirt of hot melt glue
-
After a while, the top half just fell over dead with a perfectly shiny cut right down the middle!
-
Perhaps because I carry dense stuff in the packs, they tended to flop side-to-side.
-
It’s essentially impossible to get a picture of a project built largely from acrylic sheet, but here goes.
-
The cells don’t produce much more energy at the lower rate and, at 1.8 Ah, are still well below their 2.3 Ah rating.
-
This cable guide / pulley may work better than the one described there, because it puts the cable a bit closer to the original location.
-
While having it pop open is unlikely, just the thought of a razor blade sliding around next to my hip was unsettling.
-
I collected some loose cells and pulled some cells from the packs to see how they compared individually.
The Smell of Molten Projects in the Morning 