-
The double-sided tape holding these to their screws isn’t continually compressed
-
You could generalize this to a filament QC instrument
-
I had to increase the FERROR and MIN_FERROR values by about two orders of magnitude from their defaults
-
The whole LinuxCNC to 5i25 to 7i76 to M542 to motor chain functions pretty much as it should
-
The stripped wire ends will fray and shed strands across the boards
-
But I’m not expecting a decade out of these straps
-
They’re sealing off the presumably contaminated soil under what was once the lumberyard
-
Note that the SSR must have a DC output, not the more common AC output,
The Smell of Molten Projects in the Morning 