-
That slight mismatch adds to the overall positioning error
-
The transparent top coating isn’t armor plating
-
Finally, the Reset and TX pin pads simply tore loose from the circuit board.
-
You should, of course, use a 3.3 V FTDI Basic board with a 3.3 V Pro, which would at least put two similar voltage sources head-to-head.
-
They’re not pretty, but the driveway hasn’t complained yet.
-
I eventually noticed the corrosion creeping around the edges.
-
The aluminum cone eventually worries its way through the plastic post and falls into the tank, taking the heat-formed button from the post along with it.
-
The digital multimeter in my desk drawer tops out at 2000 kΩ
The Smell of Molten Projects in the Morning 