-
This one failed just slightly beyond the duration of its one-year warranty
-
That’s what I get for applying too much torque to the blade, I thought…
-
Much as I expected, there’s just not enough energy in a 5 V / 200 A resistance soldering unit to weld 8-mil nickel strips to AA cells.
-
The Butterfly Bush is attracting all manner of insects, including these bumblebees.
-
I’m hoping that with some tweaking I can get enough heat to make it all work out. If not, it’ll still be a king-hell resistance soldering setup.
-
I can’t believe I’m the first person to figure this out, but …
-
After a while, the top half just fell over dead with a perfectly shiny cut right down the middle!
-
Perhaps because I carry dense stuff in the packs, they tended to flop side-to-side.
The Smell of Molten Projects in the Morning 