-
That slight mismatch adds to the overall positioning error
-
The original 12 VAC 50 W transformer now loafs along at 4 W and ballasts the lamp base
-
The main shape now has a 2 mm taper to ease the magazine spring past the upper edge of the block
-
Repeated heating took the starch right out of that poor spring
-
It’s producing reasonable quality stuff again
-
The LEDs don’t have quite enough room inside for that mount to tilt as I wanted
-
It doesn’t seem so bad from the outside
-
In this application, the 3D printer’s hand-knitted look is desirable
The Smell of Molten Projects in the Morning 