-
Entombing that mess with a squirt of hot melt glue
-
Removing the hose from the barbed fitting goes easier with a small screwdriver pushing it along
-
… contacts that actually looked better than you’d expect after half a decade on a bike.
-
The stainless steel drum (formally: Basket) had been chewing on the plastic Tub for quite some time.
-
For some unknown reason, the tapped hole on our washer was filled with steel filings
-
The instructions you’ll find elsewhere tell you to just twist the head of the shock absorber a quarter-turn to release it.
-
Don’t do like I did and pry upward with a demolition scraper…
-
Remove three Torx T-20 screws at the very bottom of the lower front panel, known as the Toe Panel, and it drops right out.
The Smell of Molten Projects in the Morning 