-
That slight mismatch adds to the overall positioning error
-
The front rod was off by 1 mm from one end to the other.
-
Plenty of clearance with better belt stability!
-
The loose wires tended to rub on the top of the cable connector.
-
The fix consisted of a tight duct tape wrap, which has absolutely nothing to recommend it other than expediency.
-
The nozzle dribbles little snots as it passes around the object’s perimeter.
-
Even after printing nice calibration objects, real-world projects sometimes don’t come out quite right.
-
Turns out my ladies don’t like pink any more than I do.
The Smell of Molten Projects in the Morning 