-
Entombing that mess with a squirt of hot melt glue
-
The trick is to just drill a hole in the top of the desk and poke the end of the rod into it.
-
Here’s the only tool I’ve found that works for this purpose.
-
I’m sure they know that when they make “choosing” difficult enough, nobody will bother.
-
After removing all the obvious screws, taking off all the various doodads, and extracting the sliding jaw, it still doesn’t come apart.
-
Now, admittedly, the cap doesn’t hold much energy.
-
Cell A4 has 58% of nominal capacity. Admittedly, that’s 90% of the capacity of the rest, but, still …
-
I’ve been cycling a motley assortment of paired cells through the thing and figured some measurements were in order.
The Smell of Molten Projects in the Morning 