-
Entombing that mess with a squirt of hot melt glue
-
“Stop charging when [the surface temperature] is over 70C or it feels very hot”.
-
What you do not want: the wrench rips the corners off the head before loosening the thread.
-
Then I mixed up a batch of Bondo auto-body repair epoxy, buttered up the end of the heating element, and gooshed it into the socket.
-
They haven’t seen fit to correct the holes in the top cover in the last seven or eight years: “Made with pride in the USA”, indeed.
-
With any luck, you won’t have that much sediment and the drainage will clear after only a few iterations.
-
It’s definitely not Duracell’s fault: the cell had a best-used-by date in 1997.
-
The general notion is that one can put the current crop of ultrabright 5 mm LEDs to good use.
The Smell of Molten Projects in the Morning 