-
The Step2 rolling garden seat took an untimely fall
-
The obvious question is whether you want a single high-wattage cartridge heater or a pair of low(er)-wattage units
-
My Shop Assistant used a fairly new measuring tape and reported that the retracting crank handle fell off in “normal use”.
-
I suggested making all the connectors from fishmouthed sections of the CPVC tube, which called for a bit of Quality Shop Time before the next build session.
-
Any attempt to glue the feet in place will simply attach them to the tabs and nothing else
-
The green and white layers evidently disintegrated to produce the chunks that blocked the nozzle.
-
The last digit is, hal-lay-loo-ya, the actual bore diameter; sorta, kinda, in some cases.
-
Don’t reach across the build platform of your Thing-O-Matic with the extruder at 215 °C
The Smell of Molten Projects in the Morning 