-
The motor brushes seem to be a pair of stiff wires
-
This time the socket split axially on the side away from the mirror,
-
My rule of thumb: when I can see the liner, it’s time to replace the tire.
-
Add snippets of retroreflective tape to the inside of the rim.
-
A small improvement: add a snippet of heat shrink tubing to the screw in the L-shaped hold-down clamps
-
Alas, when I went to the parts bin, that’s the value I didn’t have any of.
-
Once a year you gotta clean the crud out, whether it needs it or not.
-
I cut two transparent disks from ordinary electronics packaging material, plus a red disk from the Primary Red filter material mentioned there…
The Smell of Molten Projects in the Morning 