-
That slight mismatch adds to the overall positioning error
-
The force required to move the beltless X stage dropped from 0.75 pounds to zero.
-
The extrusion settings, more or less, kinda-sorta, for the latest objects.
-
Now, those objects may have other problems, but two things work really well.
-
They’re about as flat and level as you could possibly want from a loose plate sitting atop a moving platform
-
It reports the build platform’s behavior during an actual extrusion
-
The rough rule of thumb: if the ABS layer isn’t obvious, then it’s too thin.
-
Protect those little pins that drive the ABP belt motor
The Smell of Molten Projects in the Morning 