-
Entombing that mess with a squirt of hot melt glue
-
It may work out better to assemble large objects from thinner parts.
-
Just lower the motor a little bit, flip the pulley over to put the setscrews on the top, and it’ll work.
-
Always test your brakes
-
The digital caliper on my desk has been getting a lot of use lately and, as expected, that delicate glued repair failed.
-
A quartet of very small knots
-
A mere 0.2 mm is 60% of the layer thickness!
-
On the good side, the platform remains level within 0.05 mm, which is right down around my measurement resolution.
The Smell of Molten Projects in the Morning 