-
Entombing that mess with a squirt of hot melt glue
-
This is the point where the horror film audience starts chanting “Don’t open the door! Don’t open the door!”
-
A snippet of heatshrink tubing and a blob of hot-melt glue seems in order…
-
The two little mounting screws holding the cleat dingus worked their way loose.
-
They’d been camping out inside the cushion for quite some time and used the far corner as their latrine.
-
The transition between yellow and black was rather weird.
-
It turns out that extrusion temperature doesn’t have any effect on Reversal zits, either.
-
Reversal zits aren’t much of a problem at very slow extrusion speeds.
The Smell of Molten Projects in the Morning 