-
The Step2 rolling garden seat took an untimely fall
-
JB Industro-Weld Epoxy turns out to be a nearly perfect color match
-
The connector wiring and alignment puts the thermistor signal on the cable shield
-
It got hot enough to push the solder into its semi-liquid state.
-
I have not the foggiest idea what’s going on in there, but … it seems to work.
-
A boring bar is exactly the right hammer for the job.
-
The flimsy seatpost mount doesn’t work on a recumbent, of course, so I build a mount
-
All successive Z motions will be upward, so the backlash stays compensated and every layer comes out just about exactly correct.
The Smell of Molten Projects in the Morning 