-
This one failed just slightly beyond the duration of its one-year warranty
-
Turns out that a chunk of HAL code can do a nice job of locking out an inactive joystick axis.
-
Yes, I know all about why you shouldn’t have E-stop run through software. This is a Sherline mill. Work with me here.
-
You’ll need these to wire it up as a control pendant for your EMC2 CNC milling machine…
-
I rediscovered my spreadsheet of spectral response data
-
Spring is on its way, despite the recent storms!
-
I wanted 1600×1200, but both of the listed options caused a garbled display
-
A bit of rummaging turned up a Dremel 125 “High Speed Cutter” that looked to be exactly the right hammer for the job.
The Smell of Molten Projects in the Morning 