-
Entombing that mess with a squirt of hot melt glue
-
This herd seems to be a family unit that’s traveling around the neighborhood.
-
I’ve spent the last few months associating a red LED at that spot on the dresser with a jammed X10 controller.
-
Turns out that a chunk of HAL code can do a nice job of locking out an inactive joystick axis.
-
Yes, I know all about why you shouldn’t have E-stop run through software. This is a Sherline mill. Work with me here.
-
You’ll need these to wire it up as a control pendant for your EMC2 CNC milling machine…
-
I rediscovered my spreadsheet of spectral response data
-
Spring is on its way, despite the recent storms!
The Smell of Molten Projects in the Morning 