-
The deer managed to unfurl enough tongue to reach over the edge
-
The rough rule of thumb: if the ABS layer isn’t obvious, then it’s too thin.
-
Protect those little pins that drive the ABP belt motor
-
I filled the cutouts on the old plates with JB Industro Weld epoxy
-
I decided to scrap the ABP and modify the HBP to use the same removable plates.
-
It’s not great, but it’s better than nothing.
-
It would probably look more professional without the full-frontal Barbie color scheme.
-
This represents the first pass at un-constraining the X stage
The Smell of Molten Projects in the Morning 