-
After about eight years and a similar failure last year, this came as no surprise: It’s a W5W “parking light” in the same fixture as the melty halogen high-beam bulbs (used as daytime running lights at half power), so it gets toasted on those occasions when we drive somewhere. The adhesive holding the LED strip…
-
Good news… * apart from some scuffs, the camera still works * he managed to find the shutter button * and the button bezel * and the spring!
-
That’s what I get for applying too much torque to the blade, I thought…
-
Much as I expected, there’s just not enough energy in a 5 V / 200 A resistance soldering unit to weld 8-mil nickel strips to AA cells.
-
The Butterfly Bush is attracting all manner of insects, including these bumblebees.
-
I’m hoping that with some tweaking I can get enough heat to make it all work out. If not, it’ll still be a king-hell resistance soldering setup.
-
I can’t believe I’m the first person to figure this out, but …
-
After a while, the top half just fell over dead with a perfectly shiny cut right down the middle!
The Smell of Molten Projects in the Morning 