-
That slight mismatch adds to the overall positioning error
-
A 1 A fuse can pass 3 A for 80 ms and live to tell the tale!
-
The snarl of wires, cables, and filaments inside a Thing-O-Matic is a wonder to behold.
-
The Y axis rods seem to be a bit too long for the overall case size
-
The next time you take your Thing-O-Matic apart, epoxy the damn nuts in place
-
This isn’t a problem until one of the heating resistors blows out and shorts the +12 V supply to the Thermal Core.
-
Those few millimeters make all the difference in the world
-
The errors generally happen in the X direction because the X stage slides on two rods, each of which is fixed at four places.
The Smell of Molten Projects in the Morning 