-
The slug reduces the pretravel to nearly zero
-
We had to make a booklet out of a PDF file that contained several wide tables
-
Turning the screw another half turn certainly won’t move the bearing another 0.1 mm into the filament
-
All of that hangs from the single screw in the lower left corner of the upper fan
-
A bight of wire from the white LED panels drooped onto the platform during homing
-
The smaller MakerGear V4 hot end uses a completely different mount
-
Of course, the mounting slots in the new switch didn’t match those in the old switch.
-
They’re getting hungry right about now
The Smell of Molten Projects in the Morning 