-
This one failed just slightly beyond the duration of its one-year warranty
-
The solution turns out to be putting all the configuration options back in /etc/X11/xorg.conf, exactly where they started.
-
It turns out that the buttons on the front are remarkably easy to squash in your pocket.
-
Having obtained eyeballometric measurements from the case, the next step was to doodle some shapes on graph paper and pencil in the dimensions.
-
The first step was to get all the relevant dimensions from an existing pack.
-
On the bright side, it’ll be a lot easier to bike across the bridge…
-
Grab a screw in a pin vise, brace it on the bench vise, and file off everything that doesn’t fit:
-
I’ll probably end up using some bendy wire anyway.
The Smell of Molten Projects in the Morning 