-
This one failed just slightly beyond the duration of its one-year warranty
-
None of those metal parts has any provision to control a static charge accumulation, which means the charge will increase until one of two events transpires…
-
It makes the logic supply vulnerable to glitches induced by motor current switching.
-
This modification provides separate +12 V power wires to the Extruder and Heated Build Platform heater MOSFETs.
-
Molex connector pins aren’t rated for that much current, so the +12 V supply arrives at the board in poor condition.
-
A hack that’ll cause OpenSCAD to STFU and just start up.
-
It seems a westbound van, traveling at what’s tautologically called “a high rate of speed”, swerved across Main Street,.
-
Retroreflective to find it under the bench
The Smell of Molten Projects in the Morning 