-
This one failed just slightly beyond the duration of its one-year warranty
-
Any attempt to glue the feet in place will simply attach them to the tabs and nothing else
-
The green and white layers evidently disintegrated to produce the chunks that blocked the nozzle.
-
The last digit is, hal-lay-loo-ya, the actual bore diameter; sorta, kinda, in some cases.
-
Don’t reach across the build platform of your Thing-O-Matic with the extruder at 215 °C
-
Then I put a mirror flat on the Sherline’s table / tooling plate to reflect the beam back up the spindle.
-
Obviously, what you’re seeing are overexposed more-or-less Gaussian spots, so their diameters aren’t fixed numbers.
-
One might quibble with the last digit, given the bit of snot hanging from the nozzle, but it’s pretty close.
The Smell of Molten Projects in the Morning 