-
So a super stock TOM can print upwards of 50 mm/s on non-critical parts, but something around 30 mm/s would work better should you care about surface finish.
-
Overall, the thickness now lies within 0.05 mm of the 0.33 mm average.
-
I had to determine the actual height of the trip point experimentally
-
The switch must sit flat on a 120 °C platform, withstand being poked with a 220 °C nozzle, repel ABS, and trip with better than 0.1 mm repeatability.
-
They don’t get too hot after an hour’s worth of printing
-
On the other paw, it’s not a monster dead weight,
-
The last time around the red one must have been closer to hand
-
Subscribe
Subscribed
Already have a WordPress.com account? Log in now.
The Smell of Molten Projects in the Morning 