The Smell of Molten Projects in the Morning

Ed Nisley's Blog: Shop notes, electronics, firmware, machinery, 3D printing, laser cuttery, and curiosities. Contents: 100% human thinking, 0% AI slop.

Dinosaur Variations

Fixing the Tiny T-Rex’s legs produced an aligned set of shapes in LightBurn that, after a bank shot off Inkscape to name them, became a solid model in OpenSCAD:

Tiny T-Rex - 100mm - layered solid model
Tiny T-Rex – 100mm – layered solid model

Those SVG shapes ooze into 3D with a few linear_extrude() operations:

include <BOSL2/std.scad>

EyeFill = true;

/* [Hidden] */

Reposition = [0,-424];      // move SVG shapes closer to the origin

BodyThick = 2.0;
ArmorThick = 1.0;


translate(Reposition) {
  linear_extrude(ArmorThick)
    difference() {
      import("Tiny T-Rex 100 mm layers.svg",center=false,id="Armor");
      import("Tiny T-Rex 100 mm layers.svg",center=false,id="Eye");
    }
    up(ArmorThick + BodyThick)
      linear_extrude(ArmorThick)
       difference() {
          import("Tiny T-Rex 100 mm layers.svg",center=false,id="Armor");
          import("Tiny T-Rex 100 mm layers.svg",center=false,id="Eye");
        }
}

translate(Reposition)
    up(ArmorThick)
      color("Green")
        linear_extrude(BodyThick)
          import("Tiny T-Rex 100 mm layers.svg",center=false,id="Body");

if (EyeFill) {
  translate(Reposition) {
    linear_extrude(ArmorThick)
        import("Tiny T-Rex 100 mm layers.svg",center=false,id="Eye");
    up(ArmorThick + BodyThick)
      color("Red")
        linear_extrude(ArmorThick)
            import("Tiny T-Rex 100 mm layers.svg",center=false,id="Eye");
  }
}

The Reposition constant holds the offset needed to haul the SVG shapes close to the OpenSCAD origin.

The obviously redundant translate() operations maintain the separate shapes as separate objects, so that PrusaSlicer can apply separate materials / colors:

Tiny T-Rex PETG layered - top
Tiny T-Rex PETG layered – top

The printing plate produces a granular effect on the bottom surface:

Tiny T-Rex PETG layered - bottom
Tiny T-Rex PETG layered – bottom

The color scheme makes PETG look dangerously edible, doesn’t it?

Conversely, you can tell PrusaSlicer it’s all one shape and print it in bendy TPU:

Tiny T-Rex TPU layered - top
Tiny T-Rex TPU layered – top

That’s on the M2 with the 0.35 mm nozzle. The top looks a bit under-stuffed, although the bottom came out fine:

Tiny T-Rex TPU layered - bottom
Tiny T-Rex TPU layered – bottom

TPU doesn’t bridge well, filling the bottom eye filled with threads from above. I doubt TPU “support material” would be removable without a death-match knife fight.

Making the printed ones much thicker would let them stand up with the laser-cut version:

Tiny T-Rex layered
Tiny T-Rex layered

They make a cute little herd …

Comments

Spam comments get trashed, so don’t bother; you’re not as clever as you think. Comment moderation may cause a delay.