-
The other Step2 rolling garden seat took an untimely fall
-
The first pass, however, showed that not only was the surface curved, but it wasn’t parallel to the top of the fins.
-
Same content, different look…
-
So I went to a junkyard and picked up a nice seat from a fancy car for about $50
-
If the table wasn’t a raw slab of half-inch plywood bolted to a surplus printer (?) stand, I’d care a lot more…
-
The chips came out of this hole in little crumbles, rather than the long stringy swarf from the solid aluminum on the other side.
-
As it turned out, the failure meant it was time for the more-or-less annual contact cleaning.
-
Words fail me.
The Smell of Molten Projects in the Morning 