-
That slight mismatch adds to the overall positioning error
-
The HT’s mic input is galvanically isolated from the rest of the circuit board.
-
So I punted: two strips of tape hold the enclosure in place on the HT.
-
This is brassboard hardware; I must now build three final versions.
-
They seem to be referring to an auto-wedgie
-
Just look at the leverage you can apply to those few millimeters.
-
Turns out that the programs are provided by parties having, shall we say, long-term interests that may not coincide with mine.
-
Machining the clamp is straightforward
The Smell of Molten Projects in the Morning 