-
Entombing that mess with a squirt of hot melt glue
-
Having figured out how to put line numbers in the thing for proofing…
-
The fourth hole is squeezed between two pin-header sockets, to the extent that no screw in my collection will fit.
-
The note written on the sheath reminds both my shop assistant and me which way the cutting happens.
-
A few days later my dim consciousness finally took note that the water kept draining down into the pack between sips.
-
The case cracks through at the stress raiser formed where the “switch” contacts rest on a sharp inside corner
-
Drill out the recess barely larger than the ball: the slight clearance allows the cured rubber to squish out around the ball.
-
I’m not averse to applying force majeure to either an unsuspecting LPT cable or the case itself.
The Smell of Molten Projects in the Morning 