-
This one failed just slightly beyond the duration of its one-year warranty
-
I’d expect the thickness to be pretty well controlled over a few feet of sheet, but that’s not how things went down.
-
The brass tube “locating pins” work surprisingly well.
-
He was content to watch us go by
-
Crude, but good enough for this purpose.
-
The general notion is to flycut about 2/3 of the length of the panel, then slide it far enough to cut the remainder.
-
After exhausting all other possibilities, I looked in the Brownells assortment again
-
I tend to not use many of those keys, but Volume +/- and Mute come in handy.
The Smell of Molten Projects in the Morning 