-
Of late, the magnetic stirrer mixing my morning cocoa occasionally doesn’t start spinning when I turn it on, which calls for some investigation. Removing the four obvious screws concealed under the rubber feet and prying off bottom cover reveals the trivial innards: The speed adjustment pot holds the little circuit board in place, with the…
-
Whereupon Newton took control and left no way out
-
Which revealed how the cord got loose in the first place
-
The laser-cut disks are held in place by pure faith and the overwhelming weight of all the MDF in the table
-
Yes, those are wire strands poking out of the hole
-
That steel flange prevented the roller from making firm contact with the box and pressing the tape into place
The Smell of Molten Projects in the Morning 