-
This one failed just slightly beyond the duration of its one-year warranty
-
The note written on the sheath reminds both my shop assistant and me which way the cutting happens.
-
A few days later my dim consciousness finally took note that the water kept draining down into the pack between sips.
-
The case cracks through at the stress raiser formed where the “switch” contacts rest on a sharp inside corner
-
Drill out the recess barely larger than the ball: the slight clearance allows the cured rubber to squish out around the ball.
-
I’m not averse to applying force majeure to either an unsuspecting LPT cable or the case itself.
-
The outer rim of the rivet holding the solder tab in place departed for the distant reaches of the Basement Laboratory.
-
The shale has eroded / spalled away from the concrete anchor.
The Smell of Molten Projects in the Morning 