-
Entombing that mess with a squirt of hot melt glue
-
Grab a screw in a pin vise, brace it on the bench vise, and file off everything that doesn’t fit:
-
I’ll probably end up using some bendy wire anyway.
-
Those large eyespots trip your protect-the-baby response every time.
-
Come to find out that the new gratuitously gold-plated 2.5 mm plugs in my stash have a slightly thicker front plate that doesn’t quite fit into the recess
-
Trim it with tinsnips (or a shear if you have one), then introduce it to Mr Belt Sander.
-
The HT’s mic input is galvanically isolated from the rest of the circuit board.
-
So I punted: two strips of tape hold the enclosure in place on the HT.
The Smell of Molten Projects in the Morning 