-
Entombing that mess with a squirt of hot melt glue
-
A foray into the parts heap produced a copper bolt threaded 1/2″-20 and a matching steel nut.
-
The cylindrical center of the pedestal must conduct light into the dosimeter, conduct a positive charge into the contact pin, and push that pin hard enough to make contact inside the dosimeter.
-
The overall plan looked something like this, at least before I started cutting metal…
-
He’s about crow-sized with a much snappier paint job.
-
Come to find out, after considerable digging, that one must add this secret incantation to each Display stanza in /etc/X11/xorg.conf…
-
Can you tell that Eks is an engineer?
-
The obvious conclusion is that any lens in the low 50s x 40-ish range will suffice.
The Smell of Molten Projects in the Morning 