-
The motor brushes seem to be a pair of stiff wires
-
This gadget appeared on an umbrella we’d left outdoors to dry.
-
She wanted a larger flat surface around the sewing machine adjacent to the table.
-
The solution is a drop of Loctite, which should be applied to the canonical “clean and dry” threads.
-
Of course, those dowels are just an inch or two shorter than needed.
-
I must divide down an external 60 kHz signal to produce a 10-Hz interrupt to drive the modulator.
-
I printed out The Fine Manual and penciled in the Arduino names, but that’s getting smudgy.
-
Most likely you’re being too clever with the preprocessor.
The Smell of Molten Projects in the Morning 