PC Tweakage

Huion H610Pro (V2) Tablet vs. xsetwacom

For unknown reasons, likely having to do with ordinary system updates, both the Huion H610Pro (V2) tablet’s device name and the display output’s name have changed. This came to light when I discovered the tablet’s stylus was no longer constrained to the landscape display, which worked fine when I set it up barely a month ago.

Running the setup command manually:

xsetwacom --verbose set "HUION Huion Tablet Pen stylus" MapToOutput "DP-1"
... Display is '(null)'.
... 'set' requested for 'HUION Huion Tablet Pen stylus'.
 <<< snippage >>>
... Checking device 'HUION Huion Tablet stylus' (11).
... Checking device 'HUION Huion Tablet eraser' (19).
Cannot find device 'HUION Huion Tablet Pen stylus'.

Apparently, the device formerly known as HUION Huion Tablet Pen stylus is now called HUION Huion Tablet stylus.

Fine, I can live with that. Try again:

xsetwacom --verbose set "HUION Huion Tablet stylus" MapToOutput "DP-1"
... Display is '(null)'.
... 'set' requested for 'HUION Huion Tablet stylus'.
 <<< snippage >>>
... Checking device 'HUION Huion Tablet stylus' (11).
... Checking device 'HUION Huion Tablet eraser' (19).
... Device 'HUION Huion Tablet stylus' (11) found.
... Found output 'VGA-1' (disconnnected)
... Found output 'DP-1' (disconnnected)
... Found output 'HDMI-1' (disconnnected)
... Found output 'DP-2' (connected)
... CRTC (2560x0) 1440x2560
... Found output 'HDMI-2' (disconnnected)
... Found output 'DP-1-8' (connected)
... CRTC (0x0) 2560x1440
... Found output 'DP-1-1' (disconnnected)
Unable to find output 'DP-1'. Output may not be connected.

Apparently, the video output formerly known as DP-1 has fissioned into DP-1-1 and DP-1-8, with only the latter connected. Weirdly, nothing happened to DP-2.

Once more, into the bleach:

xsetwacom --verbose set "HUION Huion Tablet stylus" MapToOutput "DP-1-8"
... Display is '(null)'.
... 'set' requested for 'HUION Huion Tablet stylus'.
 <<< snippage >>>
... Checking device 'HUION Huion Tablet stylus' (11).
... Checking device 'HUION Huion Tablet eraser' (19).
... Device 'HUION Huion Tablet stylus' (11) found.
... Found output 'VGA-1' (disconnnected)
... Found output 'DP-1' (disconnnected)
... Found output 'HDMI-1' (disconnnected)
... Found output 'DP-2' (connected)
... CRTC (2560x0) 1440x2560
... Found output 'HDMI-2' (disconnnected)
... Found output 'DP-1-8' (connected)
... CRTC (0x0) 2560x1440
... Setting CRTC DP-1-8
... Remapping to output area 2560x1440 @ 0,0.
... Transformation matrix:
... 	[ 0.640000 0.000000 0.000000 ]
... 	[ 0.000000 0.562500 0.000000 ]
... 	[ 0.000000 0.000000 1.000000 ]

Well, that worked.

Actually, I had to constrain the stylus to DP-2, then jam it back on DP-1-8, to spread the tablet’s horizontal extent over the entire monitor. Updating the startup script started the tablet properly the next morning.

The new device name certainly makes more sense and, perhaps, the X output connection now recognizes the landscape monitor’s ability to pass its DisplayPort video stream along to a second monitor.