The Smell of Molten Projects in the Morning

Ed Nisley's Blog: Shop notes, electronics, firmware, machinery, 3D printing, laser cuttery, and curiosities. Contents: 100% human thinking, 0% AI slop.

The New Hotness

  • Delta 17 Series Temperature Knob Removal

    As a reminder for the next time in this rodeo, the latches holding the temperature adjustment knob on the Delta 17 Series dual-handle bath / shower faucet look like this:

    Delta bath faucet cap latches
    Delta bath faucet cap latches

    I am unable to apply enough force to the smooth edge of the knob opposite the handle to un-latch it, so I jammed a small prydriver into the gap and twisted enough to pop the latch, at the obvious risk of scarring the chrome plating.

    A better approach would involve a plastic prydriver intended for consumer electronics case cracking.

    For the record:

    • Unlike the other bath faucets, this one has shutoff valves inside the wall
    • The replacement cartridge is RP46463
    • A dab of silicone grease on the rotating valve surface in the back improves its performance

    Ideally, I won’t need any of that information again.