The New Hotness

My version of a mount for the HQ Sixteen’s “stylus laser” clamps a 1 inch polypropylene ball between two plates:

HQ Sixteen - Stylus Laser - ball clamp test fit — HQ Sixteen – Stylus Laser – ball clamp test fit

The plates have a sphere subtracted from them and a kerf sliced across the sphere’s equator for clamping room:

HQ Sixteen - Stylus Laser Mount - solid model — HQ Sixteen – Stylus Laser Mount – solid model

Given that this is a relatively low-stress situation, I embedded BOSL2 nuts to produce threads in the plate rather than use brass inserts.

The side plates start as simple rectangles:

HQ Sixteen - Stylus Laser Mount - solid model - mount sides — HQ Sixteen – Stylus Laser Mount – solid model – mount sides

Subtracting the electronics pod shape from those slabs matches them exactly to the curvalicious corner:

HQ Sixteen - Stylus Laser Mount - solid model - mount shaping — HQ Sixteen – Stylus Laser Mount – solid model – mount shaping

The weird angle comes from tilting the mount to aim the laser in roughly the right direction when perpendicular to the plates:

HQ Sixteen - Stylus Laser Mount - solid model - show — HQ Sixteen – Stylus Laser Mount – solid model – show

That angle can be 0° to 30°, although 25° seems about right. The slab sides neither stick out the top nor leave gaps in the corner over that range, after some cut-and-try ~~tinkering~~ sizing.

One of the M3 screws just did not want to go into its hole:

HQ Sixteen - Stylus Laser - threadless M3 screw — HQ Sixteen – Stylus Laser – threadless M3 screw

A bad day in the screw factory, I suppose.

The OpenSCAD source code as a GitHub Gist:

	// Handiquilter HQ Sixteen Stylus Laser Mount
	// Ed Nisley – KE4ZNU
	// 2025-02-23

	include <BOSL2/std.scad>
	include <BOSL2/threading.scad>

	Layout = "Pod"; // [Show,Build,Pod,Mount]

	/* [Hidden] */

	PodWidth = 110.0; // overall width of pod
	PodScrewClear = 50.0; // clear distance between pod screws
	PodRecenter = [0,0]; // pod trace upper corner to origin if not done in Inkscape

	BaseAngle = -25; // laser neutral angle

	BallOD = 25.4 + 0.2; // bearing ball + easy fit clearance
	BallOffset = [70.0,0,-35.0]; // upper corner to ball center

	LaserOD = 12.2; // laser module
	LaserLength = 38.0;

	Kerf = 1.0; // clamp gap
	Plate = [35.0,35.0,8.0 + Kerf]; // basic mount plate

	WallThick = 5.0; // upright walls: plate to pod

	WasherOD = 7.0;

	ScrewPitch = 0.5;
	ScrewNomOD = 3.0;
	ScrewNomID = ScrewNomOD – ScrewPitch;

	ScrewOC = Plate – [WasherOD,WasherOD,0];

	Gap = 5.0; // build spacing

	//———-
	// HQ Sixteen electronics pod

	module Pod() {

	xrot(90)
	down(PodWidth/2)
	linear_extrude(height=PodWidth,convexity=5)
	translate(PodRecenter)
	import("HQ Sixteeen – pod profile.svg",
	layer="Pod Profile");
	}

	module LaserPointer() {
	cylinder(d=LaserOD,h=LaserLength,center=true);
	}

	module Ball() {

	union() {
	sphere(d=BallOD,$fn=4*12);
	down(0.25*LaserLength)
	LaserPointer();
	}
	}

	module Mount() {

	union() {
	difference() {
	union() {
	cuboid(Plate,anchor=CENTER);
	for (j=[-1,1])
	translate([-(BallOffset.x – Plate.x)/2,j*(Plate.y + WallThick)/2,Kerf/2])
	cuboid([BallOffset.x,WallThick,-0.75*BallOffset.z],anchor=BOTTOM);
	}
	cuboid([4Plate.x,4Plate.y,Kerf],anchor=CENTER);
	Ball();
	for (i=[-1,1], j=[-1,1])
	translate([iScrewOC.x/2,jScrewOC.y/2,0])
	cylinder(d=1.2ScrewNomOD,h=2Plate.z,anchor=CENTER,$fn=6);

	yrot(-BaseAngle)
	translate(-BallOffset)
	Pod();

	}


	for (i=[-1,1], j=[-1,1])
	translate([iScrewOC.x/2,jScrewOC.y/2,Kerf/2])
	// flat size root dia height pitch
	threaded_nut(1.5*ScrewNomOD,ScrewNomID,(Plate.z – Kerf)/2,ScrewPitch,$slop=0.10,
	bevel=false,ibevel=false,anchor=BOTTOM);
	}
	}

	//———-
	// Build things

	if (Layout == "Pod")
	Pod();

	if (Layout == "Mount")
	Mount();


	if (Layout == "Show") {
	yrot(BaseAngle) {
	color("SteelBlue")
	Mount();
	color("Magenta",0.5)
	Ball();
	color("Red")
	yrot(180)
	cylinder(d=2,h=-2*BallOffset.z,$fn=12);

	}
	translate(-BallOffset)
	color("Silver",0.8)
	Pod();
	}

	if (Layout == "Build") {
	left(Plate.x/2 + Gap/2)
	intersection() {
	cuboid([4Plate.x,4Plate.y,-BallOffset.z],anchor=DOWN);
	down(Kerf/2)
	Mount();
	}

	right(Plate.x/2 + Gap/2)
	intersection() {
	cuboid([4Plate.x,4Plate.y,Plate.z/2],anchor=DOWN);
	up(Plate.z/2)
	Mount();
	}
	}

view raw HQ Sixteen – Stylus Laser Mount.scad hosted with ❤ by GitHub

The New Hotness

HQ Sixteen: Stylus Laser Ball Mount