The Smell of Molten Projects in the Morning

Ed Nisley's Blog: Shop notes, electronics, firmware, machinery, 3D printing, laser cuttery, and curiosities. Contents: 100% human thinking, 0% AI slop.

The New Hotness

  • Zeiss Ikon Ikoflash 4

    A flash gun is hard to beat for straight-up nostalgia:

    Zeiss Ikon Ikoblitz 4 - box
    Zeiss Ikon Ikoblitz 4 – box

    This Zeiss Ikon Ikoblitz 4 is in fine shape:

    Zeiss Ikon Ikoblitz 4 - front
    Zeiss Ikon Ikoblitz 4 – front

    And no more grubby than one might expect after all those decades:

    Zeiss Ikon Ikoblitz 4 - back
    Zeiss Ikon Ikoblitz 4 – back

    I distinctly remember Flash Guide Numbers:

    Zeiss Ikon Ikoblitz 4 - guide-number calculator
    Zeiss Ikon Ikoblitz 4 – guide-number calculator

    The red dial scale has the Guide Numbers (aperture × feet) and the lower black dial scale gives the lens apertures. The manual doesn’t mention the black figures above the red Guide Numbers; they’re metric Guide Number (aperture × meters), which would have been obvious back in the day.

    The tidy shell slides off when you release a latch in the back:

    Zeiss Ikon Ikoblitz 4 - front - stowed
    Zeiss Ikon Ikoblitz 4 – front – stowed

    Then the reflector unfurls:

    Zeiss Ikon Ikoblitz 4 - front unfurled
    Zeiss Ikon Ikoblitz 4 – front unfurled

    Mirabile dictu, the previous owner removed the 15 V “hearing aid” battery (Eveready 504, 60 mA·h in the 504A alkaline version) before storing the flash, leaving the contacts in pristine condition:

    Zeiss Ikon Ikoblitz 4 - CR123A test fit
    Zeiss Ikon Ikoblitz 4 – CR123A test fit

    A 3 V CR123A primary lithium cell snaps perfectly into the battery holder, which I define as a Good Omen: a dab of circuitry could turn this into self-powered and highly attractive Art. This would be one of the very few applications well-suited for the coldest blue-white LEDs.

    One could adapt an A23 12 V alkaline battery (33 mA·h) to the holder, at the cost of half the capacity.

    The silver shield just to the left of the battery conceals a 250 μF (!) nonpolarized capacitor.

    One could build a bayonet-base (GE #5 / Press 25) adapter or poke a doodad with a 9 mm cylindrical base into the M2 bulb adapter (unrelated to my M2 printer):

    Zeiss Ikon Ikoblitz 4 - bulb adapter
    Zeiss Ikon Ikoblitz 4 – bulb adapter

    Herewith, the Zeiss Ikon Ikoblitz 4 – Instruction Manual, should you need more details.

    This hardware may be a progenitor of Gibson’s vat-grown Zeiss Ikon eyes.