The New Hotness

Almost exactly three years later, it’s time to tighten the helmet mirror mount screws:

That’s a 0.035 inch = 35 mil hex wrench, of which Eks reminds me “Any time your design requires a tiny [obscene gerund] wrench, you’re doing it wrong”.

The sequence goes like this:

• Loosen that tiny setscrew
• Unscrew & remove the mirror boom
• Remove brass screw & azimuth pivot
• Tighten screw in elevation pivot
• Tighten tiny setscrew on elevation arc
• Reinstall & tighten azimuth pivot
• Reinstall mirror boom
• Tighten tiny setscrew

Going strong after seven years!