The New Hotness

The LED parts box disgorged some single-color Pirhana-style LEDs:

Astable - 2N7000 - Mono Pirhana LED — Astable – 2N7000 – Mono Pirhana LED

Didn’t quite catch the blink, but the ~~Ping-Pong ball~~ radome lights up just as you’d expect.

The radome sits on a stripped-down RGB LED spider:

Astable Multivibrator Battery Holder - mono LED Spider - fit view — Astable Multivibrator Battery Holder – mono LED Spider – fit view

The circuitry is the same as the First Light version, with a 1 MΩ resistor stabilizing the LED ballast resistor:

Astable - 2N7000 - Mono Pirhana LED - detail — Astable – 2N7000 – Mono Pirhana LED – detail

Those are 1 µF ceramic caps in the astable section, so I’m no longer abusing electrolytics, and a stylin’ 100 nF film cap metering out the LED pulse up above.

Just for pretty, I’ve been using yellow / black wires for the battery connections and matching the LED color with its cathode lead.

The OpenSCAD source code as a GitHub Gist:

	// Holder for Li-Ion battery packs
	// Ed Nisley KE4ZNU January 2013
	// 2018-11-15 Adapted for 1.5 mm pogo pins, battery data table
	// 2018-12 RGB LED spider, general cleanups

	/* [Layout options] */

	BatteryName = "NP-BX1"; // [NP-BX1,NB-5L,NB-6L]

	RGBCircuit = false; // false = 1 strut pair, true = 2 pairs

	Layout = "Spider"; // [Build,Show,Fit,Case,Lid,Pins,RGBSpider,Spider]

	/* [Extrusion parameters] – must match reality! */
	// Print with +2 shells and 3 solid layers

	ThreadThick = 0.25;
	ThreadWidth = 0.40;

	HoleWindage = 0.2;

	function IntegerMultiple(Size,Unit) = Unit * ceil(Size / Unit);
	function IntegerLessMultiple(Size,Unit) = Unit * floor(Size / Unit);

	Protrusion = 0.1; // make holes end cleanly

	/* [Hidden] */

	inch = 25.4;

	BuildOffset = 3.0; // clearance for build layout

	Gap = 2.0; // separation for Fit parts

	//- Basic dimensions

	WallThick = 4*ThreadWidth; // holder sidewalls

	BaseThick = 6*ThreadThick; // bottom of holder to bottom of battery
	TopThick = 6*ThreadThick; // top of battery to top of holder

	//- Battery dimensions – rationalized from several samples
	// Coordinate origin at battery corner with contacts, key openings downward

	T_NAME = 0; // Name must fit recess, so don't get loquacious
	T_SIZE = 1;
	T_CONTACTS = 2;
	T_KEYS = 3;

	BatteryData = [
	["NP-BX1",[43.0,30.0,9.5],[[-0.75,6.0,6.2,"+"],[-0.75,16.0,6.2,"-"]],[[1.70,3.70,2.90],[1.70,3.60,2.90]]],
	["NB-5L", [45.0,32.0,8.0],[[-0.82,4.5,3.5,"-"],[-0.82,11.0,3.5,"+"]],[[2.2,0.75,2.0],[2.2,2.8,2.0]]],
	["NB-6L",[42.5,35.5,7.0],[[-0.85,5.50,3.05,"-"],[-0.85,11.90,3.05,"+"]],[[2.0,0.70,2.8],[2.0,2.00,2.8]]],
	];

	echo(str("Battery: ",BatteryName));

	BatteryIndex = search([BatteryName],BatteryData,1,0)[0];
	echo(str(" Index: ",BatteryIndex));

	BatterySize = BatteryData[BatteryIndex][T_SIZE]; // X = length, Y = width, Z = thickness
	echo(str(" Size: ",BatterySize));

	Contacts = BatteryData[BatteryIndex][T_CONTACTS]; // relative to battery edge, front, and bottom
	echo(str(" Contacts: ",Contacts));

	ContactOC = Contacts[1].y – Contacts[0].y; // + and – terminals for pogo pin contacts
	ContactCenter = Contacts[0].y + ContactOC/2;

	KeyBlocks = BatteryData[BatteryIndex][T_KEYS]; // recesses in battery face set X position
	echo(str(" Keys: ",KeyBlocks));

	//- Pin dimensions

	ID = 0;
	OD = 1;
	LENGTH = 2;

	PinShank = [1.5,2.0,6.5]; // shank, flange, compressed length
	PinFlange = [1.5,2.0,0.5]; // flange, length included in PinShank
	PinTip = [0.9,0.9,2.5]; // extended spring-loaded tip

	WireOD = 1.7; // wiring from pins to circuitry

	PinChannel = WireOD; // cut behind flange for solder overflow
	PinRecess = 3.0; // recess behind pin flange end for epoxy fill

	echo(str("Contact tip dia: ",PinTip[OD]));
	echo(str(" .. shank dia: ",PinShank[ID]));

	OverTravel = 0.5; // space beyond battery face at X origin

	//- Holder dimensions

	GuideRadius = ThreadWidth; // friction fit ridges
	GuideOffset = 7; // from compartment corners

	LidOverhang = 2.0; // atop of battery for retention
	LidClearance = LidOverhang * (BatterySize.z/BatterySize.x); // … clearance above battery for tilting
	echo(str("Lid clearance: ",LidClearance));

	CaseSize = [BatterySize.x + PinShank[LENGTH] + OverTravel + PinRecess + GuideRadius + WallThick,
	BatterySize.y + 2WallThick + 2GuideRadius,
	BatterySize.z + BaseThick + TopThick + LidClearance];
	echo(str("Case size: ",CaseSize));

	CaseOffset = [-(PinShank[LENGTH] + OverTravel + PinRecess),-(WallThick + GuideRadius),0]; // position around battery

	ThumbRadius = 10.0; // thumb opening at end of battery

	CornerRadius = 3*ThreadThick; // nice corner rounding

	LidSize = [-CaseOffset.x + LidOverhang,CaseSize.y,TopThick];

	LidOffset = [0.0,CaseOffset.y,0];

	//- Wire struts

	StrutDia = 1.6; // AWG 14 = 1.6 mm
	StrutSides = 3*4;

	StrutBase = [StrutDia,StrutDia + 4*WallThick,CaseSize.z – TopThick]; // ID = wire, OD = buildable

	//StrutOC = [IntegerLessMultiple(BatterySize.x – StrutBase[OD],5.0), // set easy OC wire spacing
	// IntegerMultiple(CaseSize.y + StrutBase[OD],5.0)];
	StrutOC = [IntegerLessMultiple(CaseSize.x – 2CornerRadius -2StrutBase[OD],5.0),
	IntegerMultiple(CaseSize.y + StrutBase[OD],5.0)];

	StrutOffset = [CaseSize.x/2 + CaseOffset.x,BatterySize.y/2]; // from case centerlines

	StrutAngle = atan(StrutOC.y/StrutOC.x);

	echo(str("Strut OC: ",StrutOC));

	//- RGB / Pirhana / Neopixel-ish LEDs

	RGBBody = [8.0,8.0,5.0]; // Z = body height

	PixelPCB = [4.0,10.0,3.0]; // Neopixel-ish PCBs, ID = chip window

	RGBPin = 5.0; // pin length
	RGBPinsOC = [5.0,5.0]; // pin layout

	RGBRecess = RGBBody.z + RGBPin/2; // maximum LED recess depth

	BallOD = 40.0; // radome sphere
	BallSides = 4*StrutSides; // nice number of sides

	BallPillar = [norm([RGBBody.x,RGBBody.y]),
	norm([RGBBody.x,RGBBody.y]) + 4*WallThick,
	StrutBase[OD] + RGBBody.z];
	BallChordM = BallOD/2 – sqrt(pow(BallOD/2,2) – (pow(BallPillar[OD],2))/4);
	echo(str("Ball chord depth: ",BallChordM));

	//———————-
	// Useful routines

	module PolyCyl(Dia,Height,ForceSides=0) { // based on nophead's polyholes

	Sides = (ForceSides != 0) ? ForceSides : (ceil(Dia) + 2);

	FixDia = Dia / cos(180/Sides);

	cylinder(r=(FixDia + HoleWindage)/2,h=Height,$fn=Sides);
	}

	//——————-
	//– Guides for tighter friction fit

	module Guides() {
	translate([GuideOffset,-GuideRadius,0])
	PolyCyl(2*GuideRadius,(BatterySize.z – Protrusion),4);
	translate([GuideOffset,(BatterySize.y + GuideRadius),0])
	PolyCyl(2*GuideRadius,(BatterySize.z – Protrusion),4);
	translate([(BatterySize.x – GuideOffset),-GuideRadius,0])
	PolyCyl(2*GuideRadius,(BatterySize.z – Protrusion),4);
	translate([(BatterySize.x – GuideOffset),(BatterySize.y + GuideRadius),0])
	PolyCyl(2*GuideRadius,(BatterySize.z – Protrusion),4);
	translate([(BatterySize.x + GuideRadius),GuideOffset/2,0])
	PolyCyl(2*GuideRadius,(BatterySize.z – Protrusion),4);
	translate([(BatterySize.x + GuideRadius),(BatterySize.y – GuideOffset/2),0])
	PolyCyl(2*GuideRadius,(BatterySize.z – Protrusion),4);

	}

	//– Contact pins
	// Rotated to put them in their natural oriention
	// Aligned to put tip base / end of shank at Overtravel limit

	module PinShape() {

	translate([-(PinShank[LENGTH] + OverTravel),0,0])
	rotate([0,90,0])
	rotate(180/6)
	union() {
	PolyCyl(PinTip[OD],PinShank[LENGTH] + PinTip[LENGTH],6);
	PolyCyl(PinShank[ID],PinShank[LENGTH] + Protrusion,6); // slight extension for clean cuts
	PolyCyl(PinFlange[OD],PinFlange[LENGTH],6);
	}
	}

	// Position pins to put end of shank at battery face
	// Does not include recess access into case

	module PinAssembly() {

	union() {
	for (p = Contacts)
	translate([0,p.y,p.z])
	PinShape();

	translate([-(PinShank[LENGTH] + OverTravel) + PinChannel/2, // solder space
	ContactCenter,
	Contacts[0].z])
	cube([PinChannel,
	(Contacts[1].y – Contacts[0].y + PinFlange[OD]),
	PinFlange[OD]],center=true);

	for (j=[-1,1]) // wire channels
	translate([-(PinShank[LENGTH] + OverTravel – PinChannel/2),
	j*ContactOC/4 + ContactCenter,
	Contacts[0].z – PinFlange[OD]/2])
	rotate(180/6)
	PolyCyl(WireOD,CaseSize.z,6);
	}
	}

	//– Case with origin at battery corner

	module Case() {

	difference() {

	union() {

	difference() {
	union() {
	translate([(CaseSize.x/2 + CaseOffset.x), // basic case shape
	(CaseSize.y/2 + CaseOffset.y),
	(CaseSize.z/2 – BaseThick)])
	hull()
	for (i=[-1,1], j=[-1,1], k=[-1,1])
	translate([i*(CaseSize.x/2 – CornerRadius),
	j*(CaseSize.y/2 – CornerRadius),
	k*(CaseSize.z/2 – CornerRadius)])
	sphere(r=CornerRadius/cos(180/8),$fn=8); // cos() fixes undersize spheres!

	for (i= RGBCircuit ? [-1,1] : -1) { // strut bases
	hull()
	for (j=[-1,1])
	translate([iStrutOC.x/2 + StrutOffset.x,jStrutOC.y/2 + StrutOffset.y,-BaseThick])
	rotate(180/StrutSides)
	cylinder(d=StrutBase[OD],h=StrutBase[LENGTH],$fn=StrutSides);

	translate([i*StrutOC.x/2 + StrutOffset.x,StrutOffset.y,StrutBase[LENGTH]/2 – BaseThick])
	cube([2*StrutBase[OD],StrutOC.y,StrutBase[LENGTH]],center=true); // blocks for fairing

	for (j=[-1,1]) // hemisphere caps
	translate([i*StrutOC.x/2 + StrutOffset.x,
	j*StrutOC.y/2 + StrutOffset.y,
	StrutBase[LENGTH] – BaseThick])
	rotate(180/StrutSides)
	sphere(d=StrutBase[OD]/cos(180/StrutSides),$fn=StrutSides);

	}
	}

	translate([-OverTravel,-GuideRadius,0])
	cube([(BatterySize.x + GuideRadius + OverTravel),
	(BatterySize.y + 2*GuideRadius),
	(BatterySize.z + LidClearance + Protrusion)]); // battery space

	translate([BatterySize.x/2,BatterySize.y/2,0]) // recess around battery name
	cube([0.8BatterySize.x,8,2ThreadThick],center=true);

	translate([CaseOffset.x + CaseSize.x/2,BatterySize.y/2,-BaseThick + ThreadThick – Protrusion]) // recess around battery name
	cube([0.75CaseSize.x,8,2ThreadThick],center=true);
	}

	Guides(); // improve friction fit

	translate([-OverTravel,-GuideRadius,0]) // battery keying blocks
	cube(KeyBlocks[0] + [OverTravel,GuideRadius,0],center=false);
	translate([-OverTravel,(BatterySize.y – KeyBlocks[1].y),0])
	cube(KeyBlocks[1] + [OverTravel,GuideRadius,0],center=false);

	translate([BatterySize.x/2,BatterySize.y/2,-ThreadThick])
	linear_extrude(height=2*ThreadThick,convexity=10)
	text(text=BatteryName,size=5,spacing=1.20,font="Arial:style:Bold",halign="center",valign="center");

	translate([CaseOffset.x + CaseSize.x/2,BatterySize.y/2,-BaseThick])
	linear_extrude(height=2*ThreadThick + Protrusion,convexity=10)
	mirror([0,1,0])
	text(text="KE4ZNU",size=6,spacing=1.20,font="Arial:style:Bold",halign="center",valign="center");
	}

	translate([2*CaseOffset.x, // battery top access
	(CaseOffset.y – Protrusion),
	BatterySize.z + LidClearance])
	cube([2CaseSize.x,(CaseSize.y + 2Protrusion),2*TopThick]);

	for (i2 = RGBCircuit ? [-1,1] : -1) { // strut wire holes and fairing
	for (j=[-1,1])
	translate([i2StrutOC.x/2 + StrutOffset.x,jStrutOC.y/2 + StrutOffset.y,0])
	rotate(180/StrutSides)
	PolyCyl(StrutBase[ID],2*StrutBase[LENGTH],StrutSides);

	for (i=[-1,1], j=[-1,1])
	translate([iStrutBase[OD] + (i2StrutOC.x/2 + StrutOffset.x),
	j*StrutOC.y/2 + StrutOffset.y,
	-(BaseThick + Protrusion)])
	rotate(180/StrutSides)
	PolyCyl(StrutBase[OD],StrutBase[LENGTH] + 2*Protrusion,StrutSides);
	}

	translate([(BatterySize.x – Protrusion), // remove thumb notch
	(CaseSize.y/2 + CaseOffset.y),
	(ThumbRadius)])
	rotate([90,0,0])
	rotate([0,90,0])
	cylinder(r=ThumbRadius,
	h=(WallThick + GuideRadius + 2*Protrusion),
	$fn=22);

	PinAssembly(); // pins and wiring

	translate([CaseOffset.x + PinRecess + Protrusion,(Contacts[1].y + Contacts[0].y)/2,Contacts[0].z])
	translate([-PinRecess,0,0])
	cube([2*PinRecess,
	(Contacts[1].y – Contacts[0].y + PinFlange[OD]/cos(180/6) + 2*HoleWindage),
	2*PinFlange[OD]],center=true); // pin insertion hole

	}

	}

	// Lid position offset to match case
	// The polarity indicator recesses are pure bodges

	module Lid() {

	union() {
	difference() {
	translate([-LidSize.x/2 + LidOffset.x + LidOverhang,LidSize.y/2 + LidOffset.y,0])
	difference() {
	hull()
	for (i=[-1,1], j=[-1,1], k=[-1,1])
	translate([i*(LidSize.x/2 – CornerRadius),
	j*(LidSize.y/2 – CornerRadius),
	k*(LidSize.z – CornerRadius)]) // double thickness for flat bottom
	sphere(r=CornerRadius,$fn=8);

	translate([0,0,-LidSize.z/2]) // remove bottom
	cube([(LidSize.x + 2Protrusion),(LidSize.y + 2Protrusion),LidSize.z],center=true);

	translate([LidSize.x/8,0,0])
	cube([LidSize.x/4,0.75LidSize.y,4ThreadThick],center=true); // epoxy recess
	}

	translate([0,0,-(Contacts[0].z + PinFlange[OD])]) // punch wire holes
	PinAssembly();

	for (n=[0,1]) // polarity recesses
	translate([-LidOverhang/2 – 0.40,Contacts[n].y,LidSize.z – ThreadThick/2])
	cube([4,4.5,ThreadThick + Protrusion],center=true);

	}

	for (n=[0,1]) // polarity indicators
	translate([-LidOverhang/2,Contacts[n].y,LidSize.z – 1*ThreadThick]) // … proud of surface
	rotate(90)
	linear_extrude(height=2*ThreadThick,convexity=10)
	text(text=Contacts[n][3],size=5,font="Arial:style:Bold",halign="center",valign="center");
	}

	}

	// Spider for RGB LED + radome atop vertical struts

	module RGBSpider() {

	difference() {
	union() {
	for (i=[-1,1], j=[-1,1]) {
	translate([iStrutOC.x/2,jStrutOC.y/2,StrutBase[OD]/2])
	rotate(180/StrutSides) // doesn't quite match crosspieces; close enough
	sphere(d=StrutBase[OD]/cos(180/StrutSides),$fn=StrutSides);
	translate([iStrutOC.x/2,jStrutOC.y/2,0])
	rotate(180/StrutSides)
	cylinder(d=StrutBase[OD],h=StrutBase[OD]/2,$fn=StrutSides);
	}

	for (m=[-1,1]) // connecting bars
	rotate(m*StrutAngle)
	translate([0,0,StrutBase[OD]/4])
	cube([norm(StrutOC),StrutBase[OD],StrutBase[OD]/2],center=true);

	translate([0,0,0]) // pillar for RGB LED and ball
	cylinder(d=BallPillar[OD],h=BallPillar[LENGTH],$fn=BallSides);
	}

	for (i=[-1,1], j=[-1,1]) // strut wires
	translate([iStrutOC.x/2,jStrutOC.y/2,-Protrusion])
	rotate(0)
	PolyCyl(StrutBase[ID],StrutBase[OD]/2,6);

	for (m=[-1,1], n=[0,1]) // RGBA wires through bars
	rotate(mStrutAngle + n180)
	translate([StrutOC.x/3,0,-Protrusion])
	PolyCyl(StrutBase[ID],StrutBase[OD],6);

	translate([0,0,BallOD/2 + BallPillar[LENGTH] – BallChordM]) // ball inset
	sphere(d=BallOD);

	translate([0,0,2*RGBBody.z + (BallPillar[LENGTH] – BallChordM) – RGBRecess]) // LED inset
	cube(RGBBody + [HoleWindage,HoleWindage,3*RGBBody.z],center=true); // XY clearance + huge height for E-Z cut

	translate([0,0,StrutBase[OD]/2]) // Neopixel recess
	PolyCyl(PixelPCB[OD],3*RGBBody.z,BallSides/2);

	for (m=[-1,1]) // RGBA wires through pillar
	rotate(m*StrutAngle)
	translate([0,0,StrutBase[OD]/2 + WireOD/2 + 0*Protrusion])
	cube([norm(StrutOC)/2,WireOD,WireOD],center=true);

	}
	}

	// Spider for single LED atop struts, with the ball
	// Aligned to struts at terminal end of battery on Y axis

	module Spider() {

	difference() {
	union() {
	for (j=[-1,1]) {
	translate([-StrutOC.x/2,j*StrutOC.y/2,StrutBase[OD]/2])
	rotate(180/StrutSides)
	sphere(d=StrutBase[OD]/cos(180/StrutSides),$fn=StrutSides);
	translate([-StrutOC.x/2,j*StrutOC.y/2,0])
	rotate(180/StrutSides)
	cylinder(d=StrutBase[OD],h=StrutBase[OD]/2,$fn=StrutSides);
	}

	translate([-StrutOC.x/2,0,StrutBase[OD]/4]) // connecting bars
	cube([StrutBase[OD]*cos(180/StrutSides),StrutOC.y,StrutBase[OD]/2],center=true);

	translate([-StrutOC.x/2,0,0]) // pillar for RGB LED and ball
	cylinder(d=BallPillar[OD],h=BallPillar[LENGTH],$fn=BallSides);
	}

	for (j=[-1,1]) // strut wires
	translate([-StrutOC.x/2,j*StrutOC.y/2,-Protrusion])
	rotate(0)
	PolyCyl(StrutBase[ID],StrutBase[OD]/2,6);

	translate([-StrutOC.x/2,0,0]) // wires through bars
	for (n=[-1,1])
	rotate(n*90)
	translate([StrutOC.x/3,0,-Protrusion])
	PolyCyl(StrutBase[ID],StrutBase[OD],6);

	translate([-StrutOC.x/2,0,-Protrusion]) // center hole for Neopixel
	rotate(180/6)
	PolyCyl(StrutBase[ID],StrutBase[OD],6);

	translate([-StrutOC.x/2,0,BallOD/2 + BallPillar[LENGTH] – BallChordM]) // ball inset
	sphere(d=BallOD);

	translate([-StrutOC.x/2,0,2*RGBBody.z + (BallPillar[LENGTH] – BallChordM) – RGBRecess]) // LED inset
	cube(RGBBody + [HoleWindage,HoleWindage,3*RGBBody.z],center=true); // XY clearance + huge height for E-Z cut

	translate([-StrutOC.x/2,0,StrutBase[OD]/2]) // Neopixel recess
	PolyCyl(PixelPCB[OD],3*RGBBody.z,BallSides/2);

	translate([-StrutOC.x/2,0,StrutBase[OD]/2 + WireOD/2 + 0*Protrusion]) // wire channels
	cube([WireOD,StrutOC.y/2,WireOD],center=true);

	}
	}

	//——————-
	// Build it!

	if (Layout == "Case")
	Case();

	if (Layout == "Lid")
	Lid();

	if (Layout == "RGBSpider") {
	RGBSpider();
	}

	if (Layout == "Spider") {
	Spider();
	}

	if (Layout == "Pins") {
	color("Silver",0.5)
	PinShape();
	PinAssembly();
	}

	if (Layout == "Fit") { // reveal pin assembly
	difference() {
	Case();

	translate([(CaseOffset.x – Protrusion),
	Contacts[1].y,
	Contacts[1].z])
	cube([(-CaseOffset.x + Protrusion),CaseSize.y,CaseSize.z]);

	translate([(CaseOffset.x – Protrusion),
	(CaseOffset.y – Protrusion),
	0])
	cube([(-CaseOffset.x + Protrusion),
	Contacts[0].y + Protrusion – CaseOffset.y,
	CaseSize.z]);
	}

	translate([0,0,BatterySize.z + Gap])
	Lid();

	color("Silver",0.15)
	PinAssembly();

	if (RGBCircuit) {
	translate([StrutOC.x/2,BatterySize.y/2,2*BatterySize.z])
	difference() {
	RGBSpider();
	rotate(180-StrutAngle)
	translate([0,0,-Protrusion])
	cube([norm(StrutOC),StrutBase[OD],2*BallPillar.z],center=false);
	}
	color("Green",0.35)
	translate([StrutOC.x/2,BatterySize.y/2,2*BatterySize.z + BallOD/2 + BallPillar[LENGTH] – BallChordM])
	sphere(d=BallOD);
	}
	else {
	difference() {
	translate([StrutOC.x/2,BatterySize.y/2,2*BatterySize.z])
	Spider();
	translate([-BallPillar[OD],BatterySize.y/2,2*BatterySize.z – Protrusion])
	cube([BallPillar[OD],StrutOC.y,2*BallPillar.z],center=false);
	}
	color("Green",0.35)
	translate([0,BatterySize.y/2,2*BatterySize.z + BallOD/2 + BallPillar[LENGTH] – BallChordM])
	sphere(d=BallOD);
	}
	}

	if (Layout == "Build") {
	rotate(90) {
	translate([-BatterySize.x/2,-BatterySize.y/2,BaseThick])
	Case();
	translate([-CaseSize.x + LidSize.x,-(LidSize.y/2 + LidOffset.y),0])
	Lid();
	if (RGBCircuit)
	translate([StrutOC.x + BatterySize.x/2,0,0])
	RGBSpider();
	else
	translate([StrutOC.x + BatterySize.x/2,0,0])
	Spider();
	}
	}

	if (Layout == "Show") {
	Case();
	translate([0,0,(BatterySize.z + Gap)])
	Lid();
	color("Silver",0.25)
	PinAssembly();
	if (RGBCircuit) {
	translate([StrutOC.x/2,BatterySize.y/2,2*BatterySize.z])
	RGBSpider();
	color("Green",0.35)
	translate([StrutOC.x/2,BatterySize.y/2,2*BatterySize.z + BallOD/2 + BallPillar[LENGTH] – BallChordM])
	sphere(d=BallOD);
	}
	else {
	translate([StrutOC.x/2,BatterySize.y/2,2*BatterySize.z])
	Spider();
	color("Green",0.35)
	translate([0,BatterySize.y/2,2*BatterySize.z + BallOD/2 + BallPillar[LENGTH] – BallChordM])
	sphere(d=BallOD);
	}
	}

view raw Astable Multivibrator Battery Holder.scad hosted with ❤ by GitHub

The New Hotness

Astable Multivibrator: Monochrome Pirhana LED