The New Hotness

One of the bird box entrance reducers I installed nigh onto a decade ago is still on duty, although downy woodpeckers definitely want a larger hole:

Bird Box - gray PVC pipe reducer - woodpecker damage — Bird Box – gray PVC pipe reducer – woodpecker damage

Another reducer had gone missing over the years, so I made one from a length of PVC pipe:

Bird Box - PVC pipe reducer - shaping — Bird Box – PVC pipe reducer – shaping

It started as 1-½ PVC pipe, 1-⅞ inch actual OD and should fit into a 1-½ hole, so I measured 1.5 × 3.15 around the circumference, bandsawed out the excess, draped it over a 1-½ Forstner bit, toasted it with a heat gun, and squashed it so it’s just a little bit bigger than the (enlarged!) hole in the box.

Now the entrance is 1-¼ (-ish), just like it should be:

Bird Box - PVC pipe reducer - installed — Bird Box – PVC pipe reducer – installed

The bird box in the front yard has been attracting starlings, in addition to serving as a hawk perch:

New Coopers Hawks - bird box takeoff whoops — New Coopers Hawks – bird box takeoff whoops

The oblong hole required advanced manufacturing techniques:

The front face should be too slick for larger birds and the little ones will zip right into the hole:

Bird Box - 3D printed entrance reducer — Bird Box – 3D printed entrance reducer

The two starlings who’d been evaluating the box seem to have moved on; we doubt they’re now homeless.

The OpenSCAD source code as a GitHub Gist:

	// Bird Box – oval entrance reducer
	// Ed Nisley KE4ZNU 2020-02-12

	//- Extrusion parameters must match reality!
	// Print with 3 shells and 3 solid layers

	ThreadThick = 0.25;
	ThreadWidth = 0.40;

	HoleWindage = 0.2;

	function IntegerMultiple(Size,Unit) = Unit * ceil(Size / Unit);

	Protrusion = 0.1; // make holes end cleanly

	inch = 25.4;

	//———————-
	// Dimensions

	EntranceID = 1.25 * inch;

	BoxHole = [1.5,2.25] * inch;
	BoxWall = 0.75 * inch;

	HoleOC = BoxHole.y – BoxHole.x;

	FlangeWidth = 5.0;
	FlangeThick = 5*ThreadThick;

	$fn = 12*4;

	//——————-
	// Build it

	difference() {
	union() {
	linear_extrude(height=BoxWall + FlangeThick)
	hull()
	for (j=[-1,1])
	translate([0,j*HoleOC/2])
	circle(d=BoxHole.x);
	linear_extrude(height=FlangeThick)
	hull()
	for (j=[-1,1])
	translate([0,j*HoleOC/2])
	circle(d=BoxHole.x + 2*FlangeWidth);
	}
	translate([0,0,-Protrusion])
	cylinder(d=EntranceID,h=2*BoxWall);
	}

view raw Oval Entrance Reducer.scad hosted with ❤ by GitHub

The New Hotness

Bird Box Entrance Reducers: Round 2