Archive for March 25th, 2020

Mini-Lathe vs. Case-Hardened Shaft

While doodling a drag knife holder for the Sherline, I figured a 3/8 inch shaft would hold all the parts and fit neatly into a standard Sherline tool holder, which it did:

Sherline Diamond Drag Holder - installed
Sherline Diamond Drag Holder – installed

Having recently upcycled a 3/8 inch shaft from the Thing-O-Matic into a pen holder for the CNC 3018-XL, I cut off another section with an abrasive wheel, then tried to face it off:

Hardened shaft facing - abrasive step
Hardened shaft facing – abrasive step

Although the mini-lathe’s carbide insert gnawed at the shaft’s case-hardened shell, it obviously wasn’t making much progress against that step.

Back to the abrasive cutoff saw:

Hardened shaft facing - abrasive flattening
Hardened shaft facing – abrasive flattening

Which looked better, although it still wasn’t quite perpendicular to the shaft axis.

Back to the lathe:

Hardened shaft facing - lumpy face
Hardened shaft facing – lumpy face

Well, it’s better, but it sure ain’t pretty.

Put gently, the mini-lathe’s lack of rigidity doesn’t help in the least. The compound was a-reelin’ and a-rockin’ on every revolution and eventually turned a slight tilt into a distinct radial step.

Memo to Self: Dammit, use a brass rod!

,

7 Comments