Archive for March 20th, 2020

Round Soaker Hose Splint

One of two new round rubber soaker hoses arrived with a slight crimp, enough to suggest it would crumble at an inopportune moment. Rather than return the hose for something that’s not an obvious failure, I clamped the crimp:

Round Soaker Hose Splice - top
Round Soaker Hose Splice – top

Unlike the clamps for the punctured flat soaker hoses, this one doesn’t need to withstand much pressure and hold back a major leak, so I made the pieces a bit thicker and dispensed with the aluminum backing plates:

Round Soaker Hose Splice - bottom
Round Soaker Hose Splice – bottom

The solid model is basically the same as for the flat hoses, with a slightly oval cylinder replacing the three channels:

Round Soaker Hose Splice - OpenSCAD model
Round Soaker Hose Splice – OpenSCAD model

The OpenSCAD source code as a GitHub Gist:

, , ,

Leave a comment