Advertisements

Archive for January 21st, 2016

Ham It Up v1.3 Noise Source Spectrum

The adapter stack to attach the spectrum analyzer to the Ham It Up noise source turned out to be:

  • N male to BNC female
  • BNC double-male gender bender
  • BNC female to UHF male
  • UHF female to SMA male cable

Which puts a serious lever arm on the spectrum analyzer end of the chain:

SMA to N adapter stack

SMA to N adapter stack

Ya gotta have stuff, but a pair of cables going directly from the Ham It Up’s SMA female to the analyzer’s N female are on their way around the curve of the planet even as I type.

That peak at 300 MHz is about +10 dBm, but averaging 25 peak values at each frequency trims off 5 dB and makes it easier to see:

Noise source spectrum - pk det 25 avg

Noise source spectrum – pk det 25 avg

The reference level at the top of the graticule is +30 dBm, not the usual +10 dBm, so the left end of the trace doesn’t obliterate the marker readout.

So the noise seems good for VHF to UHF projects, which seems reasonable. The noise at the low end falls dramatically with narrower bandwidths, as you’d expect; it’s reasonably flat around -30 dBm below 100 MHz.

You’d want a bandpass filter in front of whatever you were doing, so as to keep that 300 MHz hash out of everything else.

 

Advertisements

3 Comments