Silhouette Glasses: Temple Re-repair

This was not the failure mode I expected:

Silhouette temple - failed repair
Silhouette temple – failed repair

As failures go, that one’s survivable; slightly larger epoxy dots should do the trick:

Silhouette temple - re-repair
Silhouette temple – re-repair

The other temple worked loose inside the brass tube and rotated freely, so I yanked it out, bashed the tip slightly flatter, and epoxied it back in place, along with overcoating the epoxy dots on the lens to forestall another failure.

This has obviously blown right by the point of absurdity, but …