Comments on: HT GPS+Voice: Battery Contacts

By: APRS Electronics Case: Battery Contacts, Again « The Smell of Molten Projects in the Morning

Wed, 21 Nov 2012 12:25:30 +0000

[...] the contacts passing power to the Wouxun HT worked well, they were obviously (in retrospect, as always) in the wrong place. Recently I rode the [...]

By: Wouxun KG-UV3D Battery Contact Locations « The Smell of Molten Projects in the Morning

Tue, 28 Aug 2012 11:40:29 +0000

[...] contacts hit the pack so far off-center from the studs that they very nearly miss the heads on the 4-40 brass screws I’m using as contacts. This family portrait shows the radio, the battery pack, and the GPS+voice case: Wouxun KG-UV3D [...]

By: Wouxun HT GPS+Voice Interface: Circuitry! « The Smell of Molten Projects in the Morning

Mon, 20 Aug 2012 11:18:19 +0000

[...] yellow wires on the far right are temporary power connections; battery power enters through the contact studs in those large holes that press against the radio’s battery terminals. The cable in the lower [...]