Comments on: Wouxun KG-UV3D GPS+Voice Interface: Improved Case

By: Updating An Old Bike « The Smell of Molten Projects in the Morning

Updating An Old Bike « The Smell of Molten Projects in the Morning — Mon, 03 Sep 2012 11:52:08 +0000

[...] haven’t figured out how to mount the GPS/APRS tracker + radio and antenna. The evidence suggests she prefers to travel incognito from now on… You [...]

By: TinyTrak3+ Trimpots: Not All Are Created Equal « The Smell of Molten Projects in the Morning

Thu, 23 Aug 2012 11:49:41 +0000

[...] designed the GPS+Audio case around the TinyTrak3+ board in my radio, which has two square, blue-plastic trimpots. The case [...]

By: TinyTrak3+ Trimpots: Not All Are Created Equal « The Smell of Molten Projects in the Morning

Thu, 23 Aug 2012 11:49:40 +0000

[...] designed the GPS+Audio case around the TinyTrak3+ board in my radio, which has two square, blue-plastic trimpots. The case [...]

By: Wouxun KG-UV3D Plug Plate « The Smell of Molten Projects in the Morning

Wouxun KG-UV3D Plug Plate « The Smell of Molten Projects in the Morning — Sun, 19 Aug 2012 11:28:28 +0000

[...] that suggest spacing the plugs at 11.5 mm on center, I tweaked that parameter in the source code there and printed another one, just like the other one. Actually, I printed four of the fool things this [...]

By: Wouxun HT GPS+Voice Case: Colors! « The Smell of Molten Projects in the Morning

Wed, 08 Aug 2012 11:08:23 +0000

[...] than print another green case, the new, improved case has orange end caps: HT-GPS Case – End caps on build [...]

By: Harbor Freight Slitting Saw Arbor « The Smell of Molten Projects in the Morning

Fri, 03 Aug 2012 11:27:19 +0000

[...] a blade with a 3/8 inch hole, so a bit of lathe work produced one while the 3D printer cranked out a GPS+audio case: Cutoff saw arbor in Sherline [...]

By: Wouxun KG-UV3D Battery Capacity « The Smell of Molten Projects in the Morning

Wed, 11 Jul 2012 11:59:04 +0000

[...] those packs are to be useful, I must conjure up a better battery holder. Having already designed a battery-shaped case for the GPS interface, it should be easy enough to build a radio-shaped mount for the pack. You [...]